Facebook icon

 

Civil engineering

WELDPLAST S6 digitally regulated hand extruder 230V/5300W CEE 32A plug

WELDPLAST S6 digitally regulated hand extruder 230V/5300W CEE 32A plug

With 6 kg/h output, WELPLAST S6 is the most powerful worm extruder in its class. For process equipment manufacture and civil engineering.

Astro 230V/1800W, roller 50mm, with test channel

Astro 230V/1800W, roller 50mm, with test channel

With 5 m/min., Astro is the fastest hot-wedge welding machine for HDPE geomembranes of up to 3 mm thickness. Temperature and drive are regulated. High welding performance.

Twinny T, 230V/2300W, with testchannel and combiwedge, Euro-plug

Twinny T, 230V/2300W, with testchannel and combiwedge, Euro-plug

TWINNY T for civil engineering. With simple-to-replace combi-wedges and digital display for temperature and speed.

Twinny S, 230V/2300W, with testchannel and combiwedge, Euro-plug

Twinny S, 230V/2300W, with testchannel and combiwedge, Euro-plug

TWINNY S for civil engineering. With simple-to-replace combi-wedges and digital display for temperature and speed.

Weldplast S4 digitally regulated hand extruder 230V/3680W with Schuko plug

Weldplast S4 digitally regulated hand extruder 230V/3680W with Schuko plug

The WELDPLAST S4 is a compact, economic worm extruder with brushless motor for pre-heated air. Used in process equipment manufacture and civil engineering.

Weldplast S2 digitally regulated hand extruder 230V/3000W with Euro plug

Weldplast S2 digitally regulated hand extruder 230V/3000W with Euro plug

The WELDPLAST S2's futuristic design is not only for pleasing the eye.

Examo 300F USB tensiometer 230V/200W, with USB-memorystick, Euro-plug

Examo 300F USB tensiometer 230V/200W, with USB-memorystick, Euro-plug

The Examo is ideal for measurements directly on the construction site. Optionally with data recording to a memory card. Clamp separation 300 mm.

Comet USB hot wedge welding machine for sub roof membranes 230V/700W, without welding carriage

Comet USB hot wedge welding machine for sub roof membranes 230V/700W, without welding carriage

The COMET USB is smoke-free and very quiet. Thanks to the built-in guide system, the width of weld zone is homogeneous – resulting in no non-welded edges. It is especially suitable for pre-fabrication of sub-roof membranes.

Comet 230V/1500W/PE, wedge 70mm, with testchannel

Comet 230V/1500W/PE, wedge 70mm, with testchannel

Our smallest and most easy-to-handle welding machine COMET (only 7.5 kg), with integrated operating unit for civil engineering.

Fusion 3 air heated hand extruder 230V/3500W with Euro plug

Fusion 3 air heated hand extruder 230V/3500W with Euro plug

Easiest possible operation thanks to FUSION 3's optimal ergonomics and very slim design. With its ideal length of 690 mm, FUSION 3 is ideally suited for use in landfill sites.

Fusion 3C air heated hand extruder 230V/2800W with Euro plug

Fusion 3C air heated hand extruder 230V/2800W with Euro plug

Despite its handy length of just 580 mm, FUSION 3C achieves an amazing output rate of 3.5 kg/h.