Facebook icon

 

Passiivse tulekaitse (PFP) töötlemiseade

Passiivse tulekaitse (PFP) töötlemiseade


Handles two-part epoxy intumescent fireproofing coatings

Passive fire protection (PFP) coatings make structures more resistant to fire by insulating structural steel from high temperatures and as a result, buy time for the evacuation before structural collapse.

The Graco XM™ PFP Plural-Component Sprayer offers data reporting technology, so you can confirm that epoxy intumescent coatings are sprayed on-ratio, at requirements set by the manufacturer. The XM PFP is easy to use, maintains consistent temperature control and offers precise ratio control.

Count on Graco XM PFP for accurate, on-ratio mixing

  • Handles two-part epoxy intumescent fire protection coatings from 1:1 to 10:1
  • Provides precise ratio control
  • If off-ratio conditions occur, the system will automatically stop
  • Offers data reporting for verification the material was properly applied
  • Monitors, tracks and collects data for: mix ratio, pressure, temperature, flow rates and material usage
  • USB port to easily download data reports
  • Accurate, on-ratio mixing reduces material waste
  • Virtually eliminates the difficult task of removing improperly mixed material
  • Offers peace of mind with "set and forget" parameter settings

Technical data

  • U.S.: Metric
  • Mix Ratio Range: 1:1-10:1 (in 0.01 increments)
  • Ratio Tolerance Range (before alarm): +/- 5%
  • Maximum Flow Rate (measured with oil): 13.6 liters per minute
  • Fluid Viscosity Range: Handles mastic materials which are loaded into heated tankswith ram-fed priming piston pumps
  • Air Inlet: 1 in. npt(f)
  • Fluid Inlets: Pail (Feed Pumps)
  • Maximum Fluid Working Pressure for A and B Materials: 41 MPa, 414 bar
  • Maximum Fluid Working Pressure for Flushing: 31 MPa, 310 bar
  • Maximum Fluid Working Pressure for Heating: 0.7 MPa, 7 bar
  • Maximum Fluid Temperature: 70°C
  • XHF Gun

    XHF Gun

    For passive fire protection (PFP) materials
    For epoxy intumescent fireproofing coatings

    Designed to spray heavy viscosity epoxy intumscent fireproofing materials, the XHF Gun is rugged, reliable and easy to maintain.