Pelletized Hot Melt Adhesive Feed Systems
The Transfer Tower supports up to a 1,500lb. shipping container above a hopper feeder for fast dispensing of adhesive. The transfer tower includes level control for convenient adhesive monitoring. An optional Stand Vibrator is designed to keep adhesive pellets from bridging thus flowing freely into the transfer tower.
The Tilt Platform delivery system from ITW Dynatec makes unloading your bulk adhesive as easy as placing the adhesive tote on the tilting platform. Simple to use and easy to operate, the tilt platform automatically moves to maintain proper adhesive flow to the feeder intake valve. The tilt platform also employs an automatic locking safety system to prevent the platform from collapsing.
The ADS1 DynaFill™ automatically replenishes adhesive to the desired level in hot melt equipment. A low level indicator sends a signal to the DynaFill™ that adhesive is needed. The DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit.
The ADS1 will easily integrate with competitive equipment configurations. Out of the box installation with drop-in adhesive tank connection.
Hot melt adhesive supply units (ASUs) require frequent adhesive re-filling. If the operator does not refill the ASU often enough, there can be insufficient time to melt and condition the adhesive. This results in equipment down time and employees waiting untill the hopper temperature returns to setpoint.